Welcome To The Official Website Of Shenzhen JKN Industrial Co.!
Language:中文版|English
Search
Key Words:Medical device lithium batteryHousehold energy storage batteryElectric vehicle lithium battery packSmart home batteryMilitary police lithium battery
Household Robot Battery
11.1V2200mAh Sweep robot battery
12V 3500mAh Sweep robot battery
14.4V 1200mAh Sweep robot battery
14.4V 3500mAh Sweep robot battery
14.4V 3500 Sweeper battery
14.8V 6600mAh Sweep robot battery
14.8V2200mAh Sweep robot battery
14.8V2500mAh Smart vacuum cleaner battery
14.8V4400mAh Sweep robot battery
22.2V5Ah Service robot battery
24V12Ah Food delivery robot battery
25.9V 30Ah Handling robot lithium battery pack
48V18Ah Carry & stack robot battery
SC 3500mAh 6V sweep robot battery
Ni-MH AA 7.2V 1200mAh sweeper battery
For you we can do it
按需开发
Develop on demand
One-to-one battery solution
10小时响应
10 hour response
10 hours online consultation service
20小时交货
20 hours delivery
Small orders shipped within 20 hours
免费维护
Free maintenance
1 year free on-site technical service

14.8V4400mAh Sweep robot battery

Sweeping robot battery pack(14.8V4400mAh)
Combination:18650-4S-2P
Nominal voltage:14.8V
Nominal capacity:4400mAh
Standard continuous discharge current:2.2A
Maximum continuous discharge current:4.4A
Working temperature: charge:0~45℃; discharge:-20~60℃
Dimensions:42*42*134mm
Cycle life:500 times
Output Mode:UL1007/22AWG length 60mm(customizable)

14.8V 4400mAh 扫地机专用.jpg2.jpg

Design scheme of battery pack for sweep robot

1) protection circuit board PCM):Mainly design against protection circuit board for rechargeable high capacity battery pack. Because of the chemical characteristics of lithium battery, in order to avoid burning, explosion etc. dangerous situation, must provide over charge, over discharge, short circuit, over current & over heat etc. protection function.

2protection ICProtection IC):Main protection function chip in design scheme, carry on-line constantly monitor on over charge, over discharge, over current, short circuit etc. function of battery cell. Ensure batter cell work within the scope of safety, stability, high efficiency.

3 over current protection chipPTC):Mainly design against secondary protection function. PTC can recover thermal fuse with dual function: over current protection & auto recovery. PTC inside battery cell can prevent the cell occurs high temperature discharge and un-safe large current.

4MOSFET chipMOSFET chip, on on-off action in protection circuit

5Packing of battery packplastic film

Application Fields:

sweep robot, smart vacuum cleaner, household robot etc.

1688店铺
1688 Shop

Home|Medical Battery|AI Battery|Robot Battery|Primary Battery

Shenzhen JKN Industrial Co.

Company Address:203, Fengze Building, Huafeng Second Industrial Park, Hangcheng Avenue, Sanwei Community, Hangcheng Street, Baoan District, Shenzhen

Produce Address:Room 904, No. 24, Lane 2055, Pingcheng Road, Jiading District

Tel:+86-755-29665573Fax:+86-755-29665572

粤ICP备15100302号-4Technical Support:Su Jun Technology