24V 5Ah energy storage battery pack

Nominal voltage: 24V
Nominal capacity: 5Ah(0.2C discharge)
Continuous work current: 10A
Over current protection: 10~20A(adjustable)

Over charge protection voltage: 4.25±0.25V/Cell (optional)

Over discharge protection voltage: 2.50±0.25V/Cell (optional)

Charge mode: constant current/voltage

Charge current: 8-20A

Charge temperature/humidity: 0~45℃、45~85%RH

Dischage temperature/humidity: -20~55℃、45~85%RH

Range of storage temperature & humidity:

Short term: over one month -20~+55℃、45~85%RH

Mid term: over three months -20~+45℃、45~85%RH

Long term: within one year -5~+20℃、45~85%RH

Dimension: Height: MAX70mm
Length: MAX140mm
Thickness: MAX55mm
Weight: 1000g
Internal resistance ≤150mΩ

Design scheme of battery pack for energy storage

1) protection circuit board PCM):Mainly design against protection circuit board for rechargeable high capacity battery pack. Because of the chemical characteristics of lithium battery, in order to avoid burning, explosion etc. dangerous situation, must provide over charge, over discharge, short circuit, over current & over heat etc. protection function.

2protection ICProtection IC):Main protection function chip in design scheme, carry on-line constantly monitor on over charge, over discharge, over current, short circuit etc. function of battery cell. Ensure batter cell work within the scope of safety, stability, high efficiency.

3 over current protection chipPTC):Mainly design against secondary protection function. PTC can recover thermal fuse with dual function: over current protection & auto recovery. PTC inside battery cell can prevent the cell occurs high temperature discharge and un-safe large current.

4MOSFET chipMOSFET chip, on on-off action in protection circuit

5Packing of battery packplastic film


Copyright ©2018-2019 Shenzhen JKN Industrial Co.

粤ICP备15100302号-4Technical Support:Su Jun Technology

Sweep and visit the website